Have Questions?
Always the correct part
We know our products
Expert installation available
Delivery options for all
Convert any nitrous system being used on a Dominator application into a ZEX™ Blackout Perimeter Plate System.
*Please note that the above image shows a square flange / bolt pattern, instead of a Dominator flange / bolt pattern.
◄ Perimeter Plate Nitrous System
Update your obsolete spray-bar type nitrous system with one of our Perimeter Plate Conversion Kits. This cost effective and easy-to-install upgrade immediately delivers all the benefits of the ZEX™ Perimeter Plate Nitrous System without having to purchase an entirely new nitrous kit. Perimeter injection results in more even distribution of fuel and nitrous for maximum power and engine safety. The conversion kit includes the square flange perimeter plate, gaskets and jet conversion chart.
Fits Dominator flange intake manifolds
Includes plate, gaskets, fittings, & a nitrous / fuel jetting chart
Nitrous & fuel are injected via outlets placed at 12 points around intake plenum
Patented, Revolutionary Perimeter Plate Technology:
◄ Cryo-Sync™ Technology
The ZEX™ Perimeter Plate routes the nitrous through a set of internal passages before spraying it into your engine. During this circulation process, the nitrous temperature drops to -127 degrees below zero! This cryogenic phenomenon effectively turns the plate into an ultra-efficient Cryo-Sync™, cooling your carburetor and intake manifold for additional power.
◄ Airflow Enhancement™ Technology
The ZEX™ Perimeter Plate has been designed to inject the nitrous at an optimized angle, toward the center of the intake plenum. In addition to ensuring proper cylinder distribution, this ZEX™- developed technology creates a pocket of intense low pressure just below the carburetor while the nitrous is being sprayed. This low-pressure area enhances airflow into your engine, which further improves power gains.
◄ Perimeter Injection™ Technology
Unlike traditional nitrous kits, the ZEX™ Perimeter Plate employs multiple injection points to create a perfectly atomized blend of fuel and nitrous. This mixture is then fired directly into the center of the intake plenum, ensuring equal dispersal between cylinders. By optimizing cylinder-to cylinder distribution, ZEX™ Perimeter Injection™ Technology generates maximum power without sacrificing engine safety.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.
| Comodous: | Comodous in tempor ullamcorper miaculis |
| Mattis laoreet: | Pellentesque vitae neque mollis urna mattis laoreet |
| Divamus de ametos: | Divamus sit amet purus justo |
| Molestie: | Proin molestie egestas orci ac suscipit risus posuere loremous |
Yes it is.
Please make sure that you follow below steps:
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to email@domain.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to email@domain.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
